MRC 212SF Single Row Ball Bearings

$102.47

(2 customer reviews)

MODEL 6212 SF

BRAND

MRC Bearing

SKU

1132252

WEIGHT

1.790 lb

UOM

each

ITEM DETAILS
MANUFACTURER: MRC Bearing Service
WEIGHT: 1. 79 lbs.
PRODUCT NAME: 200-S Light Series Ball Bearing
DESCRIPTION: 60 mm ID x 110 mm OD x 22 mm Wide; Single Shield; No Snap Ring; Single Row Radial Steel Bearing
SPECIFICATIONS
INCH/METRIC Metric Bore
BORE TYPE Round Bore
I. D. 60 mm
O. D. [MIN]
O. D. [MAX]
O. D. 110 mm
WIDTH [MIN]
WIDTH [MAX]
WIDTH 22 mm
ENCLOSURE Single Shield
ROWS OF BALLS Single
MATERIAL Steel
O. D. TYPE Straight
BEARING TYPE Radial
PRECISION Standard
RADIAL INTERNAL CLEARANCE SPECIFICATION Normal Clearance
AMBIENT TEMPERATURE RANGE [MIN]
AMBIENT TEMPERATURE RANGE [MAX]
BALL MATERIAL Steel
CAGE TYPE Metal
CAPACITY Standard Capacity
CONTACT ANGLE
GUIDE TYPE
LUBRICATION
OUTER RING WIDTH 22 mm
PRECISION LEVEL Standard (ABEC 1)
PRELOAD LEVEL None
SEAL MATERIAL Metal
SEAL TYPE Non-Contact Seals
SEAL WIDTH
DYNAMIC LOAD RATING 10700 lbf
STATIC LOAD RATING [MAX] 7310 lbf
BALL DIA.
BEARING DESIGN
BORE B
CAGE MATERIAL Steel
COLLAR NO.
COLLAR O. D.
COLLAR WIDTH
CORNER RADIUS [MIN]
ECCENTRIC COLLAR OFFSET
FILLET RADIUS 1 1/2 mm
FLANGE O. D. [MAX]
FLANGE O. D.
FLANGE WIDTH [MAX]
FLANGE WIDTH
FLUSH GROUND
HOUSING SHOULDER DIAMETER [MIN]
HOUSING SHOULDER DIAMETER [MAX]
HOUSING SHOULDER DIAMETER
INDUSTRY STANDARD PART #
INNER RING O. D.
INNER RING OFFSET
INNER RING WIDTH 22 mm
INTERNAL DESIGN
LIMITING SPEED
LIMITING SPEED – GREASE 6000 rpm
LIMITING SPEED – OIL 7000 rpm
LIMITING SPEED – SEALED 4000 rpm
LOCKING DEVICE No Locking Device
LUBE HOLE CENTER
LUBRICANT Oil Preservative
MISALIGNMENT RANGE
NO. IN SET Single Bearing
NO. OF BALLS
O. D. (B)
OUTER RING
OUTER RING INNER DIAMETER
OUTER RING SIZE
PEAK RUNNING TORQUE (MG-MM)
PEAK STARTING TORQUE (MG-MM)
PRE LUBRICANT None
PRELOAD AMOUNT
RADIAL INTERNAL CLEARANCE Normal
RADIAL LOAD RATING [MAX]
RADIAL RIGIDITY (LBF/ΜM)
REFERENCE SPEED
SEAL O. D.
SEAL PROTECTION WIDTH
SEATING WASHER
SERIES
SET SCREW OFFSET
SET SCREW SIZE
SHAFT SHOULDER DIAMETER [MIN]
SHAFT TOLERANCE
SNAP RING No Snap Ring
SNAP RING O. D.
SNAP RING OFFSET
SNAP RING THICKNESS
SPECIAL FEATURES
STAMPING
STATIC THRUST LOAD RATING [MAX]
TEMPERATURE RANGE [MIN]
TEMPERATURE RANGE [MAX]
USE WITH
PRODUCT INFORMATION
APPLICATIONS
  • Used in applications with moderate to heavy radial loads, tow-directional thrust loads, or a combination of both
FEATURES
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm
Brand

2 reviews for MRC 212SF Single Row Ball Bearings

There are no reviews yet.

Be the first to review “MRC 212SF Single Row Ball Bearings”

Your email address will not be published. Required fields are marked *

FAQs

MRC Bearing