Filter by price
Filter by Brand
- FAGFAG 45
- Koyo BearingKoyo Bearing 96
- MRC Bearing 73
- Nachi Bearing 74
- NSK Bearings 108
- NTN Bearing 123
- SKF BearingSKF Bearing 95
- Timken 134
Top rated products
-
GR-BMQ815-7.5-L-56
Rated 5.00 out of 5$755.66
-
GR-BMQ815-5-R-56
Rated 5.00 out of 5$829.02
-
GR-H818-30-H1-12
Rated 5.00 out of 5$1,097.18
6200 Series Bearing Interchange
Open
Material: steel
Static Load: 500 lbs. – 8415 lbs
Width 9mm – 24 mm
Bore Diameter: 10mm -70mm
Closure type: Open
Dynamic Load: 885 lbs. – 10715 lbs.
Outside Diameter: 30mm – 125 mm
Max Fillet Radius: .025 – .060
1 Shield
Material: steel
Bore Diameter: 10mm – 70mm
Width: 9mm – 24 mm
Bore Diameter: 10mm – 70mm
Max Fillet Radius: .025 – .060
Closure type: Single Shielded
Outside Diameter: 30mm – 125 mm
Static Load: 500 lbs. – 8415 lbs.
2 Shields
Material: steel
Static Load: 500 lbs. – 8415 lbs.
Width: 9mm – 24 mm
Bore Diameter: 10mm – 70mm
Max Fillet Radius: .025 – .060
Dynamic Load: 885 lbs. – 10715 lbs.
Outside Diameter: 30mm – 125 mm
Closure type: Double Shielded
1 Contact Seals
Material: steel
Width: 9mm – 24 mm
Seal type: Non-Contact
Max Fillet Radius:.025 – .060
Bore Diameter: 10mm – 70mm
Closure type: Single Sealed
Static Load: 500 lbs. – 8415 lbs.
Outside Diameter: 30mm – 125 mm
Seal material: nitrile rubber
Dynamic Load: 885 lbs. – 10715 lbs.
2 Contact Seals
Material: steel
Width: 9mm – 24 mm
Seal type: Non-Contact
Max Fillet Radius:.025 – .060
Bore Diameter: 10mm – 70mm
Closure type: Double Sealed
Static Load: 500 lbs. – 8415 lbs.
Outside Diameter: 30mm – 125 mm
Seal material: nitrile rubber
Dynamic Load: 885 lbs. – 10715 lbs.
Retain. Ring, Groove
Material: steel
Width: 9mm – 24 mm
Static Load: 500 lbs. – 8415 lbs.
Bore Diameter: 10mm – 70mm
Closure type: Open
Dynamic Load: 885 lbs. – 10715 lbs.
Outside Diameter: 30mm – 125 mm
Max Fillet Radius: .025 – .060
Features: Snap Ring
1 shield deep groove ball bearings with a snap ring
Material: steel
Width: 9mm – 24 mm
Static Load: 500 lbs. – 8415 lbs.
Bore Diameter: 10mm – 70mm
Closure type: Single Shielded
Dynamic Load: 885 lbs. – 10715 lbs.
Outside Diameter: 30mm – 125 mm
Max Fillet Radius: .025 – .060
Features: Snap Ring
2 shields deep groove ball bearings with a snap ring
Material: steel
Width: 9mm – 24 mm
Static Load: 500 lbs. – 8415 lbs.
Bore Diameter: 10mm – 70mm
Max Fillet Radius: .025 – .060
Dynamic Load: 885 lbs. – 10715 lbs.
Outside Diameter: 30mm – 125 mm
Closure type: Double Shielded
Features: Snap Ring
2 seals deep groove ball bearings with a snap ring
Material: steel
Width: 9mm – 24 mm
Seal type: Non-Contact
Max Fillet Radius: .025 – .060
Bore Diameter: 10mm – 70mm
Closure type: Double Sealed
Static Load: 500 lbs. – 8415 lbs.
Features: Snap Ring
Outside Diameter: 30mm – 125 mm
Seal material: nitrile rubber
Dynamic Load: 885 lbs. – 10715 lbs.
Short Descriptions
6200
Check into the market, and one of the common types of ball bearings you will get is the 6200 model because of its diverse applications. It is a 10 mm single row deep groove ball bearing of light toughness. The ball bearings can be designed with different materials, and you have the opportunity of selecting between stainless steel, with a roller removable ring, or with roller elements.
6205 C3 KOYO
The 6205 C3 KOYO is a high-quality open deep groove type of ball bearing designed with no seals to allow for free grease and oil circulation. Therefore, it is a common type of bearing, especially in equipment and environments that are free of dirt and other foreign matter. The bearing’s width is 15 mm while the inside and outside diameters are 25 mm and 52 mm, respectively
SKF 6204
If you are in search of ball bearings, it is advisable to go for the highest quality, and one of the top options is this SKF 6204. The bearing is designed by Svenska Kullagerfabriken, a Swedish company that has cut a name both in Sweden and globally for designing quality bearings. It is an open deep groove ball bearing made without seals. Therefore, it is considered a good option for equipment where free circulation of lubricant is needed. Furthermore, it is recommended for the equipment where you are sure that no other foreign matter would be present. The inside and outside diameters of the bearing are 20mm and 47mm, respectively.
6203-2rs
If your equipment or system works in areas with a lot of dirt or the risk of foreign particles-related issues is high, it is advisable to go for a sealed type of bearing. One good example of such bearings is 6203-2rs. The 6203-2rs is a sealed deep groove radial ball bearing featuring a standard radial internal clearance. It comes with an external diameter of 40 mm and rubber seals on both sides. Its light construction makes it a perfect pick for most equipment and systems.
SKF 6203
Designed by Svenska Kullagerfabriken Company, SKF 6203 is a Single row ball bearing that features deep and uninterrupted grooves. To make the bearing more effective, the grooves are cut for a close osculation with the rolling balls. The impact of this is that the bearing can comfortably carry both axial and radial loads. The outer ring of the SKF 6203 may be capped or feature recesses.
The cage material is designed with pressed steel and has a maximum speed limit of 1200 rpm. The bore diameter is 17 mm, while the outside diameter is 40 mm.
6200 2rs
The 6200 2RS is another top-rated bearing because of its high-quality and diverse applications. It is a single row deep groove ball bearing designed using stainless steel and featuring a bore size of 10 mm. Besides, it is of light toughness and rocks sealing on both sides. So, you can comfortably use it without worrying that dirt and harmful particles can easily get into the bearing system and damage it. You will find it very effective, especially when targeting high accuracy.
6202 2RS
If you find that the 6200 2rs bearing is slightly smaller than what your equipment needs, the next top alternative is the 6202 2rs. This is a high-quality ball bearing featuring a single row deep groove design. The bearing is made of stainless steel, has a bore size of 15 mm, and a width of 11 mm. Finally, it also features rubber seals on both ends, attributes that make it an excellent pick for equipment that work in areas with high-risk of contamination.
Koyo 6200 2rs
One of the best bearings designed by Koyo is 6200 2RS. It is a high-quality single row deep groove ball bearing constructed with stainless steel. The bearing has a width of 10 mm and light toughness, attributes that make it a great option for multiple applications. Another important attribute of this bearing is that it has rubber sealing on both sides to reduce the entry of dirt into its system.
SKF 6205
If you have a rotary or factory automation system, one of the common types of bearings is the SKF 6205. The bearing is made by Svenska Kullagerfabriken, a Swedish firm that is synonymous with quality all over the globe. It is a deep groove ball bearing designed with an open style, which implies that it works best when used in environments that are free from contaminants. The bearing has an internal diameter of 25 mm, an outer diameter of 52 mm, and is very effective for dynamic loads. It is also recommended for high-rotational speeds.
Your Complete Guide to Reading Bearing Numbers | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Are you looking for bearings for your facility or machine? From afar, they might appear similar, but the truth is that they are different. Bearings are designed with varying materials and specifications to suit different equipment and applications. If you make a mistake and select the wrong bearing, it can result in the following problems:
As you can see, these are problems you do not wish to face because they can ultimately slow down your production, reduce profitability, and even cause total failure of your machine or system. So, to avoid the challenges, you need to select and use only the right bearings.
The lovely thing about bearings is that they come with identification numbering that you can easily follow. The number on every bearing provides all the information you need, but it is important first to know how to read them. To help you understand these numbers more effectively, here is a comprehensive guide to bearing nomenclature.
A Simplified Guide to Bearing Numbers
If you pick and check any bearing, it has a digit-letter type of code. A good example is S 6200 2RS. The combination of these numbers is carefully done and signifies several things, including, the type, series, size of the bore, and sealing details. Here is a demonstration of how to go about interpreting bearing numbers. In this case, for demonstration purposes, we are going to use bearing “S 6200 2RS.”
1. Start by dividing the number into three parts. See the demonstration.
2. Then, get a little deeper to determine what every code means.
In our example, “S 6200 2RS,” the first digit of the basic number is “6,” so it means that we are dealing with a “single row deep groove ball bearing.” Let’s check the meaning of the other numbers. The second digit of the basic number is the bearing’s series, which is used to denote the toughness. Number “2” on our example indicates that the bearing is light. Since we had earlier identified that the bearing on our example is a “single row deep groove ball bearing,” we can rightly add that it has “light toughness.” Other numbers used to denote toughness include:
The last two digits of the basic number denote the bore size of the bearing. See the table below to see the different bore sizes.
3. We have now decoded the meaning of all the numbers and codes for our bearing sample, S 6200 2RS. So, we can comfortably say that the bearing is a single row deep groove ball bearing of light toughness, bore size of 10 mm, and sealed on both sides. Using this guide, you can now decode the numbers and codes on bearings so that only the right models are purchased for your equipment. |