MRC 205SF SINGLE ROW BALL BRGS

ITEM DETAILS
MANUFACTURER:
MRC Bearing Service
WEIGHT:
0. 304 lbs.
PRODUCT NAME:
200-S Light Series Ball Bearing
DESCRIPTION:
25 mm ID x 52 mm OD x 15 mm Wide; Single Shield; No Snap Ring; Single Row Radial Steel Bearing
SPECIFICATIONS
INCH/METRIC
Metric Bore
BORE TYPE
Round Bore
I. D.
25 mm
O. D. [MIN]
O. D. [MAX]
O. D.
52 mm
WIDTH [MIN]
WIDTH [MAX]
WIDTH
15 mm
ENCLOSURE
Single Shield
ROWS OF BALLS
Single
MATERIAL
Steel
O. D. TYPE
Straight
BEARING TYPE
Radial
PRECISION
Standard
RADIAL INTERNAL CLEARANCE SPECIFICATION
Normal Clearance
AMBIENT TEMPERATURE RANGE [MIN]
AMBIENT TEMPERATURE RANGE [MAX]
BALL MATERIAL
Steel
CAGE TYPE
Metal
CAPACITY
Standard Capacity
CONTACT ANGLE
0°
GUIDE TYPE
LUBRICATION
OUTER RING WIDTH
15 mm
PRECISION LEVEL
Standard (ABEC 1)
PRELOAD LEVEL
None
SEAL MATERIAL
Metal
SEAL TYPE
Non-Contact Seals
SEAL WIDTH
DYNAMIC LOAD RATING
3150 lbf
STATIC LOAD RATING [MAX]
1750 lbf
BALL DIA.
BEARING DESIGN
BORE B
CAGE MATERIAL
Steel
COLLAR NO.
COLLAR O. D.
COLLAR WIDTH
CORNER RADIUS [MIN]
ECCENTRIC COLLAR OFFSET
FILLET RADIUS
1 mm
FLANGE O. D. [MAX]
FLANGE O. D.
FLANGE WIDTH [MAX]
FLANGE WIDTH
FLUSH GROUND
HOUSING SHOULDER DIAMETER [MIN]
HOUSING SHOULDER DIAMETER [MAX]
HOUSING SHOULDER DIAMETER
INDUSTRY STANDARD PART #
INNER RING O. D.
INNER RING OFFSET
INNER RING WIDTH
15 mm
INTERNAL DESIGN
LIMITING SPEED
LIMITING SPEED – GREASE
12000 rpm
LIMITING SPEED – OIL
15000 rpm
LIMITING SPEED – SEALED
8500 rpm
LOCKING DEVICE
No Locking Device
LUBE HOLE CENTER
LUBRICANT
Oil Preservative
MISALIGNMENT RANGE
NO. IN SET
Single Bearing
NO. OF BALLS
O. D. (B)
OUTER RING
OUTER RING INNER DIAMETER
OUTER RING SIZE
PEAK RUNNING TORQUE (MG-MM)
PEAK STARTING TORQUE (MG-MM)
PRE LUBRICANT
None
PRELOAD AMOUNT
RADIAL INTERNAL CLEARANCE
Normal
RADIAL LOAD RATING [MAX]
RADIAL RIGIDITY (LBF/ΜM)
REFERENCE SPEED
SEAL O. D.
SEAL PROTECTION WIDTH
SEATING WASHER
SERIES
SET SCREW OFFSET
SET SCREW SIZE
SHAFT SHOULDER DIAMETER [MIN]
SHAFT TOLERANCE
SNAP RING
No Snap Ring
SNAP RING O. D.
SNAP RING OFFSET
SNAP RING THICKNESS
SPECIAL FEATURES
STAMPING
STATIC THRUST LOAD RATING [MAX]
TEMPERATURE RANGE [MIN]
TEMPERATURE RANGE [MAX]
USE WITH
PRODUCT INFORMATION
APPLICATIONS
Used in applications with moderate to heavy radial loads, tow-directional thrust loads, or a combination of both
FEATURES
Single-row radial deep groove bearing with no filling notches
Can carry significant radial loads
Can carry substantial thrust loads in either direction, even at very high speeds
Supplied with a pressed steel cage
Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm