MRC 205SZZG SINGLE ROW BALL BRGS

$26.23

(2 customer reviews)

MODEL 205SZZG

BRAND

MRC Bearing

SKU

1132089

WEIGHT

0.325 lb

UOM

each

ITEM DETAILS
MANUFACTURER: MRC Bearing Service
WEIGHT: 0. 325 lbs.
PRODUCT NAME: 200-S Light Series Ball Bearing
DESCRIPTION: 25 mm ID x 52 mm OD x 15 mm Wide; Double Sealed; With Snap Ring; Single Row Radial Steel Bearing
SPECIFICATIONS
INCH/METRIC Metric Bore
BORE TYPE Round Bore
I. D. 25 mm
O. D. [MIN]
O. D. [MAX]
O. D. 52 mm
WIDTH [MIN]
WIDTH [MAX]
WIDTH 15 mm
ENCLOSURE Double Sealed
ROWS OF BALLS Single
MATERIAL Steel
O. D. TYPE Straight w/ Snap Ring
BEARING TYPE Radial
PRECISION Standard
RADIAL INTERNAL CLEARANCE SPECIFICATION Normal Clearance
AMBIENT TEMPERATURE RANGE [MIN]
AMBIENT TEMPERATURE RANGE [MAX]
BALL MATERIAL Steel
CAGE TYPE Metal
CAPACITY Standard Capacity
CONTACT ANGLE
GUIDE TYPE
LUBRICATION
OUTER RING WIDTH 15 mm
PRECISION LEVEL Standard (ABEC 1)
PRELOAD LEVEL None
SEAL MATERIAL Rubber
SEAL TYPE Contact Seals
SEAL WIDTH
DYNAMIC LOAD RATING 3150 lbf
STATIC LOAD RATING [MAX] 1750 lbf
BALL DIA.
BEARING DESIGN
BORE B
CAGE MATERIAL Steel
COLLAR NO.
COLLAR O. D.
COLLAR WIDTH
CORNER RADIUS [MIN]
ECCENTRIC COLLAR OFFSET
FILLET RADIUS 1 mm
FLANGE O. D. [MAX]
FLANGE O. D.
FLANGE WIDTH [MAX]
FLANGE WIDTH
FLUSH GROUND
HOUSING SHOULDER DIAMETER [MIN]
HOUSING SHOULDER DIAMETER [MAX]
HOUSING SHOULDER DIAMETER
INDUSTRY STANDARD PART #
INNER RING O. D.
INNER RING OFFSET
INNER RING WIDTH 15 mm
INTERNAL DESIGN
LIMITING SPEED
LIMITING SPEED – GREASE 12000 rpm
LIMITING SPEED – OIL 15000 rpm
LIMITING SPEED – SEALED 8500 rpm
LOCKING DEVICE No Locking Device
LUBE HOLE CENTER
LUBRICANT Polyurea Base
MISALIGNMENT RANGE
NO. IN SET Single Bearing
NO. OF BALLS
O. D. (B)
OUTER RING
OUTER RING INNER DIAMETER
OUTER RING SIZE
PEAK RUNNING TORQUE (MG-MM)
PEAK STARTING TORQUE (MG-MM)
PRE LUBRICANT
PRELOAD AMOUNT
RADIAL INTERNAL CLEARANCE Normal
RADIAL LOAD RATING [MAX]
RADIAL RIGIDITY (LBF/ΜM)
REFERENCE SPEED
SEAL O. D.
SEAL PROTECTION WIDTH
SEATING WASHER
SERIES
SET SCREW OFFSET
SET SCREW SIZE
SHAFT SHOULDER DIAMETER [MIN]
SHAFT TOLERANCE
SNAP RING With Snap Ring
SNAP RING O. D.
SNAP RING OFFSET
SNAP RING THICKNESS
SPECIAL FEATURES
STAMPING
STATIC THRUST LOAD RATING [MAX]
TEMPERATURE RANGE [MIN] -22 °F
TEMPERATURE RANGE [MAX] 250 °F
USE WITH
PRODUCT INFORMATION
APPLICATIONS
  • Used in applications with moderate to heavy radial loads, tow-directional thrust loads, or a combination of both
FEATURES
  • Single-row radial deep groove bearing with no filling notches
  • Can carry significant radial loads
  • Can carry substantial thrust loads in either direction, even at very high speeds
  • Supplied with a pressed steel cage
  • Single-row radial conrad-type bearings made with bores from 10 mm to 120 mm
Brand

2 reviews for MRC 205SZZG SINGLE ROW BALL BRGS

There are no reviews yet.

Be the first to review “MRC 205SZZG SINGLE ROW BALL BRGS”

Your email address will not be published. Required fields are marked *

FAQs

MRC Bearing