FREE SHIPPING FOR ALL ORDERS OF $150
MRC 208SFG Single Row Ball Bearings
$38.28
MODEL 208SFG
BRAND
MRC Bearing
SKU
1132163
WEIGHT
0.858 lb
UOM
each
ITEM DETAILS
| MANUFACTURER: | MRC Bearing Service |
|---|---|
| WEIGHT: | 0. 858 lbs. |
| PRODUCT NAME: | 200-S Light Series Ball Bearing |
| DESCRIPTION: | 40 mm ID x 80 mm OD x 18 mm Wide; Single Shield; With Snap Ring; Single Row Radial Steel Bearing |
SPECIFICATIONS
| INCH/METRIC | Metric Bore |
|---|---|
| BORE TYPE | Round Bore |
| I. D. | 40 mm |
| O. D. [MIN] | |
| O. D. [MAX] | |
| O. D. | 80 mm |
| WIDTH [MIN] | |
| WIDTH [MAX] | |
| WIDTH | 18 mm |
| ENCLOSURE | Single Shield |
| ROWS OF BALLS | Single |
| MATERIAL | Steel |
| O. D. TYPE | Straight w/ Snap Ring |
| BEARING TYPE | Radial |
| PRECISION | Standard |
| RADIAL INTERNAL CLEARANCE SPECIFICATION | Normal Clearance |
| AMBIENT TEMPERATURE RANGE [MIN] | |
| AMBIENT TEMPERATURE RANGE [MAX] | |
| BALL MATERIAL | Steel |
| CAGE TYPE | Metal |
| CAPACITY | Standard Capacity |
| CONTACT ANGLE | 0° |
| GUIDE TYPE | |
| LUBRICATION | |
| OUTER RING WIDTH | 18 mm |
| PRECISION LEVEL | Standard (ABEC 1) |
| PRELOAD LEVEL | None |
| SEAL MATERIAL | Metal |
| SEAL TYPE | Non-Contact Seals |
| SEAL WIDTH | |
| DYNAMIC LOAD RATING | 6900 lbf |
| STATIC LOAD RATING [MAX] | 4270 lbf |
| BALL DIA. | |
| BEARING DESIGN | |
| BORE B | |
| CAGE MATERIAL | Steel |
| COLLAR NO. | |
| COLLAR O. D. | |
| COLLAR WIDTH | |
| CORNER RADIUS [MIN] | |
| ECCENTRIC COLLAR OFFSET | |
| FILLET RADIUS | 1 mm |
| FLANGE O. D. [MAX] | |
| FLANGE O. D. | |
| FLANGE WIDTH [MAX] | |
| FLANGE WIDTH | |
| FLUSH GROUND | |
| HOUSING SHOULDER DIAMETER [MIN] | |
| HOUSING SHOULDER DIAMETER [MAX] | |
| HOUSING SHOULDER DIAMETER | |
| INDUSTRY STANDARD PART # | |
| INNER RING O. D. | |
| INNER RING OFFSET | |
| INNER RING WIDTH | 18 mm |
| INTERNAL DESIGN | |
| LIMITING SPEED | |
| LIMITING SPEED – GREASE | 8500 rpm |
| LIMITING SPEED – OIL | 10000 rpm |
| LIMITING SPEED – SEALED | 5600 rpm |
| LOCKING DEVICE | No Locking Device |
| LUBE HOLE CENTER | |
| LUBRICANT | Oil Preservative |
| MISALIGNMENT RANGE | |
| NO. IN SET | Single Bearing |
| NO. OF BALLS | |
| O. D. (B) | |
| OUTER RING | |
| OUTER RING INNER DIAMETER | |
| OUTER RING SIZE | |
| PEAK RUNNING TORQUE (MG-MM) | |
| PEAK STARTING TORQUE (MG-MM) | |
| PRE LUBRICANT | None |
| PRELOAD AMOUNT | |
| RADIAL INTERNAL CLEARANCE | Normal |
| RADIAL LOAD RATING [MAX] | |
| RADIAL RIGIDITY (LBF/ΜM) | |
| REFERENCE SPEED | |
| SEAL O. D. | |
| SEAL PROTECTION WIDTH | |
| SEATING WASHER | |
| SERIES | |
| SET SCREW OFFSET | |
| SET SCREW SIZE | |
| SHAFT SHOULDER DIAMETER [MIN] | |
| SHAFT TOLERANCE | |
| SNAP RING | With Snap Ring |
| SNAP RING O. D. | |
| SNAP RING OFFSET | |
| SNAP RING THICKNESS | |
| SPECIAL FEATURES | |
| STAMPING | |
| STATIC THRUST LOAD RATING [MAX] | |
| TEMPERATURE RANGE [MIN] | |
| TEMPERATURE RANGE [MAX] | |
| USE WITH | |
PRODUCT INFORMATION
| APPLICATIONS |
|
|---|---|
| FEATURES |
|
| Brand |
|---|
FAQs
MRC Bearing
-
engineering_handbook-4.pdf
Size: 4.05 MB
Type: pdf
Total download: 0
-
installation-5-1.pdf
Size: 281.81 kB
Type: pdf
Total download: 0
-
lubrication-5-1.pdf
Size: 390.63 kB
Type: pdf
Total download: 0
-
INTERCHANGE-5-1.pdf
Size: 760.16 kB
Type: pdf
Total download: 0
-
Drawing.gif
Size: 3.74 kB
Type: gif
Total download: 0
1 review for MRC 208SFG Single Row Ball Bearings
There are no reviews yet.