GR-B815-80-D

Regal Beloit Grove Gear&Reg; GR8150035.00

UPC: 690310004876 | UNSPSC: 26111537 | GTIN:

Gear Reducers & Gearmotors > Gear Drives > Right Angle Gear Drives > Non-Helical Worm Right Angle Drives

Grove Gear® IRONMAN® Worm Gear Reducer, Right Angle Single Reduction, Series: GR Series, 80:1 Gear Ratio, 0.204 hp Input, 0.093 hp Output, Shaft Input, Shaft Output, 0.625 in Dia x 1.76 in L Input, 0.75 in Dia x 2.11 in L Output, 21 rpm Output Maximum Speed, 1750 rpm Input Maximum Speed, 269 in-lb Output, 1.54 in Centre Distance, 0.1875 x 1.38 in Input, 3/16 x 1-1/2 in Output Keyway, PAG Synthetic Oil Lubrication, Base Mount, Cast Iron, 5.38 in H

Features:

• One piece cast iron housings with single output cover design, CNC machined for precise component fit and alignment
• Factory filled with premium Mobil® Glygoyle® 460 PAG lubricant
• Large oil capacity provides positive splash lubrication and superior cooling capability
• FKM double lip seals provide extended life through increased resistance to high temperature, abrasion and chemicals
• The unique quill seal guard protects the input seal from damage during motor installation
• Bronze worm gear chill cast from high quality bronze for maximum strength, lubricity and superior life
• Oversized high speed bearings, positively retained for frequent reversing and start/stop cycles
• Tapered roller bearings on output shaft for high overhung and thrust load capacities
• All units are 100% run and leak tested at the factory to insure that you receive the highest quality product
• Ultimate application flexibility with all angle mounting provisions, the widest selection of accessory bases and flanges and the largest selection of stock reducer styles
• Mounting dimensions are interchangeable with most industry standard reducers
• O-rings on all bearing covers, eliminating gaskets, sealants and leaks
• Oversized steel output shaft provides superior overhung load and torque characteristics

Specs:

• Input Maximum Speed: 1750 rpm
• Output Maximum Speed: 21 rpm
• Centre Distance: 1.54 in
• Input Type: Shaft
• Output Size: 0.75 in Dia x 2.11 in L
• Input Size: 0.625 in Dia x 1.76 in L
• Lubrication Type: PAG Synthetic Oil
• Torque Rating: 269 in-lb Output
• Horsepower: 0.204 hp Input, 0.093 hp Output
• Keyway Size: 0.1875 x 1.38 in Input, 3/16 x 1-1/2 in Output
• Gear Ratio: 80:1
• Output Type: Shaft
• Mounting Type: Base
• Dimensions: 5.38 in H
• Material: Cast Iron
• Type: Right Angle Single Reduction
• Series: GR Series

Packaging:

• Weight: 18.0 lb

Warranty:

Limited